GRC in Kerala's climate
A guide for homeowners, architects and builders in Kochi and across Kerala: what the weather does to a facade, how GRC answers it, and the details that make the difference.
Rain: two monsoons, about 3,000 mm a year
Kerala takes the south-west monsoon from June to September and the north-east monsoon, the thulavarsham, in October and November. Across the state that adds up to roughly 3,000 mm of rain a year, much of it driven sideways by wind.
GRC itself doesn't mind water: it's a dense cement-based material with glass fibre instead of steel, so there's nothing inside to rust and burst the surface. What matters is where the water goes. We detail every piece that faces the weather so it sheds rain:
- Tops of cornices, copings, sills and handrails slope outward, so water never sits on them.
- Drip grooves under projecting edges make water fall clear instead of running back down the wall.
- Joints between pieces are sealed with a flexible sealant, so they stay closed as the material moves with heat.
- Hollow pieces like columns and domes get a drain path, so water that gets behind can get out.
On windward walls, rain blows through a jali. Put jalis under a sunshade or overhang, or set a window or glass a little behind them, and give the sill a fall and a drain point.
When to install
GRC can be fixed in most weather, but sealants, coatings and paint need dry surfaces. The dry months are the easiest. If you want the work finished before June, order early in the year so casting and transport fit in.
- Jan dry season
- Feb dry season
- Mar dry season
- Apr dry season
- May dry season
- Jun south-west monsoon
- Jul south-west monsoon
- Aug south-west monsoon
- Sep south-west monsoon
- Oct north-east monsoon
- Nov north-east monsoon
- Dec dry season
- Dry months: best for sealing, coating and painting
- South-west monsoon
- North-east monsoon (thulavarsham)
Damp air and algae
Relative humidity sits around 85% through the monsoon months, and any outside surface in Kerala can grow black algae. A sealed GRC surface holds less dirt than plain plaster or porous stone, and an anti-fungal exterior coat slows growth further. When it's needed, a wash with water and a soft brush brings the surface back. Avoid high-pressure jets on fine detail.
Salt air near the coast
In Fort Kochi, Mattancherry, Vypin, Cherai and along the backwaters, salt in the air attacks steel. In RCC that shows up as rust stains and cracked, spalling concrete where the cover is thin. GRC has no steel inside. The fixings do, so for seaside sites ask for stainless steel anchors and dowels.
Termites and timber
Kerala's traditional houses use timber for lattice screens, brackets and pillars, and termites and damp have always been the price. GRC takes the same shapes, including the diagonal lattice of old verandah screens and the curved brackets under the eaves, with nothing for termites to eat. It can be painted in a wood tone if you want the old look.
Sun and breeze
Between the monsoons the sun is hard, especially on west walls. Jalis, screens and fins block direct sun but let air through, keeping the cross-ventilation that Kerala houses have always relied on to stay cool.
Renovating an older house
A new elevation on an old house is one of the most common jobs in Kerala. GRC is cast thin, so cornices, cladding, jalis and column covers add little load to existing walls and slabs. Your engineer should still check the fixing points on older buildings.
GRC and the alternatives
How GRC compares with the other materials used for the same jobs on Kerala buildings.
| GRC | POP or gypsum | Terracotta or clay | Timber | Cast-in-place RCC | |
|---|---|---|---|---|---|
| Outdoors through the monsoon | Yes | No, it softens when wet | Yes, but it soaks up water | Only with upkeep | Yes |
| Termites | Not affected | Not affected | Not affected | At risk | Not affected |
| Steel inside that can rust | None | None | None | None | Yes, if the cover is thin |
| Weight on the building | Light | Light | Medium | Light | Heavy |
| Domes, capitals and fine detail | Yes, from moulds | Indoors only | Small pieces only | Carved, at a cost | Hard to form on site |
Questions about the weather
More on the questions page.
How does GRC hold up in the Kerala monsoon?
Well, when it's detailed for rain. GRC has no steel inside to rust, so it doesn't crack and spall like thinly covered RCC. We shape pieces with sloped tops and drip edges and seal the joints, so water runs off instead of soaking in or streaking the wall.
Will GRC turn black with algae?
Any outside surface in Kerala can collect algae in the wet months. A sealed GRC surface holds less dirt than plain plaster, and an anti-fungal exterior coat slows growth. Washing with water and a soft brush brings it back.
Is GRC suitable near the sea in Fort Kochi, Vypin or Cherai?
Yes. Salt air attacks steel, and GRC has none inside. For seaside sites, ask for stainless steel fixings so the anchors last as long as the GRC.
When is the best time to install GRC in Kerala?
Pieces can be fixed in most weather, but sealants and paint need dry surfaces. The dry months, roughly December to May, are easiest. If you want work finished before the monsoon, order early in the year.
Ask about your site
Near the sea, on a windward hill, or an old house getting a new face? Send photos and the location, and we'll suggest the details.